Weir Warman 650 M200-MCR-G, Руководство пользователя, Страница: 222 / 287

87 / 89
BA 5010 EN 03.10
10.3 Final work
For operating and servicing the components, the pertinent instruction manuals and the
specifications in sections 5 and 7 must be observed.
For technical data, refer to the data sheet and/or the list of equipment.
Observe also item 6.22.
Damaged bolts must be replaced with new bolts of the same type and strength class.
10.4 General inspection of the gear unit
The general inspection of the gear unit should be carried out by the FLENDER Customer Service, as our
engineers have the experience and training necessary to identify any components requiring replacement.
10.5 Lubricants
The quality of the oil used must meet the requirements of the separately supplied BA 7300 EN operating
instructions, otherwise the guarantee given by FLENDER will lapse. We urgently recommend using one
of the oils listed in BA 7300 EN, because they have been tested and meet the requirements.
To avoid misunderstandings, we should like to point out that this recommendation is in
no way intended as a guarantee of the quality of the lubricant supplied. Each lubricant
manufacturer is responsible for the quality of his own product.
Information on the type, quantity and viscosity of the oil is given on the rating plate on the gear unit or in
the supplied documentation.
The quantity of oil indicated on the rating plate is an approximation only. The marks on the dipstick or
oil-sight glass are decisive for the amount of oil to be filled in.
The instructions for the use of lubricants currently recommended by FLENDER are also available on the
Internet at "http://www.flender.com".
The oils listed there are subjected to continuous tests. Under certain circumstances the oils recommended
there may therefore later be removed from the range or replaced with further developed oils.
We recommend regularly checking whether the selected lubricating oil is still recommended
by FLENDER. If it is not, the brand of oil should be changed.