Weir Warman 650 M200-MCR-G, Руководство пользователя, Страница: 148 / 287

13 / 89
BA 5010 EN 03.10
2. General notes
2.1 Introduction
These instructions are an integral part of the gear unit supplied and must be kept in its vicinity for reference
at all times.
All persons carrying out work on the gear unit must have read and understood
these instructions and must adhere to them. FLENDER accepts no
responsibility for damage or disruption caused by disregard of these
instructions.
The "FLENDER gear unit" dealt with in these instructions has been developed for driven machines in
general engineering applications. Possible applications for gear units of this series are the chemical,
rubber, food processing, plastics and other industries.
The gear unit is designed only for the application specified in section 1, "Technical data". Other operating
conditions must be contractually agreed.
The gear unit described in these instructions reflects the state of technical development at the time these
instructions went to print.
In the interest of technical progress we reserve the right to make changes to the individual assemblies and
accessories which we regard as necessary to preserve their essential characteristics and improve their
efficiency and safety.
2.2 Copyright
The copyright to these instructions is held by FLENDER AG .
These instructions must not be wholly or partly reproduced for competitive purposes, used in any
unauthorised way or made available to third parties without our agreement.
Technical enquiries should be addressed to the following works or to one of our customer services:
Flender Industriegetriebe GmbH
Thierbacher Straße 24
D ‐ 09322 Penig
Tel.: +49 (0)37381 / 615-0
Fax: +49 (0)37381 / 616-0
Internet: www.flender.com