Weir Warman 650 M200-MCR-G, Руководство пользователя, Страница: 224 / 287

89 / 89
BA 5010 EN 03.10
12. Declaration of incorporation
Declaration of Incorporation
in accordance with Directive 2006/42/EC, Annex II 1 B
The manufacturer, A. Friedr. FLENDER AG, D ­ 46393 Bocholt, declares with regard to the partly completed
machinery,
Gear Units Types
H.SH, H.VH, H.HH, H.DH, H.KH, H.FH, H.HM, H.DM, H.KM, H.FM, H.PH
B.SH, B.VH, B.HH, B.DH, B.KH, B.FH, B.HM, B.DM, B.KM, B.FM
T.SH, T.HH, T.KH, T.DH, T.FH
Sizes 1 to 22
developed for driven machines in general engineering applications:
‐ The special technical documents described in Annex VII B have been prepared.
‐ The following basic health and safety requirements set out in Directive 2006/42/EC, Annex I,
are applied and are satisfied:
1.1, 1.1.2, 1.1.3, 1.1.5; 1.2.6; 1.3.1 ‐ 1.3.4, 1.3.6 ‐ 1.3.8.1; 1.4.1, 1.4.2.1;
1.5.1, 1.5.2, 1.5.4 ‐ 1.5.11, 1.5.13; 1.6.1, 1.6.2; 1.7.1 ‐ 1.7.2, 1.7.4 - 1.7.4.3
‐ The partly completed machinery must not be put into service until it has been established
that the machinery into which the partly completed machinery is to be incorporated
has been declared in conformity with the provisions of Directive 2006/42/EC, as appropriate.
‐ The manufacturer undertakes, in response to a reasoned request by the national authorities,
to transmit in electronic form relevant information about the partly completed machinery.
‐ The person authorised to compile the relevant technical documentation is:
Friedheim Schreier (Director ZGE Engineering)
Penig, 2010‐03‐03
Friedheim Schreier (Director ZGE Engineering)
Penig, 2010‐03‐03
Hans‐Hermann Olm (Director Business Subsegment ZG)