Weir Warman 650 M200-MCR-G, Руководство пользователя, Страница: 150 / 287

15 / 89
BA 5010 EN 03.10
When the gear unit is incorporated in plant or machinery, the manufacturer of
such plant or machinery must ensure that the contents of these instructions are
incorporated in his own instructions.
• When removing the safety equipment the fixation means should be stored for later use. Removed safety
equipment must be re­installed prior to starting up.
• Notices attached to the gear unit, e.g. rating plate, direction arrows etc., must always be observed. They
must be kept free from dirt and paint at all times. Missing plates must be replaced.
• Screws which have been damaged during assembly or disassembly work must be replaced with new
ones of the same strength class and type.
• Spare parts should always be obtained from FLENDER (see also section 11.).
3.3 Environmental protection
• Dispose of any packing material in accordance with regulations or separate it for recycling.
• When changing oil, the used oil must be collected in suitable containers. Any pools of oil which may have
collected should be removed at once with an oil-binding agent.
• Preservative agents should be stored separately from used oil.
• Used oil, preservative agents, oil­binding agents and oil­soaked cloths must be disposed of in
accordance with environmental legislation.
• Disposal of the gear unit after its useful life:
─ Drain all the operating oil, preservative agent and/or cooling agent from the gear unit and dispose of
in accordance with regulations.
─ Depending on national regulations, gear­unit components and/or add­on parts may have to be
disposed of or sent for recycling separately.
3.4 Special dangers and personal protective equipment
• Depending on operating conditions, the surface of the gear unit may heat up or cool down to extreme
temperatures.
In the case of hot surfaces (> 55 °C) there is a risk of burns!
In the case of cold surfaces (< 0 °C) there is a risk of frost injury (pain, numbness,
frostbite)!
During oil changes there is a risk of scalding from escaping oil!
Small foreign matter such as sand, dust, etc. can get into the cover plates of the
rotating parts and be thrown back by these.
Risk of eye injury!
In addition to any generally prescribed personal safety equipment (such as safety
shoes, safety clothing, helmet) handling the gear unit requires wearing
suitable safety
gloves and suitable safety glasses !
The gear unit is not suitable for operation in explosion hazard locations. It must
under no circumstances be used in such locations because of the risk to life and
limb.