Weir Warman 650 M200-MCR-G, Руководство пользователя, Страница: 174 / 287

39 / 89
BA 5010 EN 03.10
H... / B... / T3.. ≤ 12 H... / B... ≥ 13
1 1 1 1
Fig. 33: Oil­temperature measurement on gear units types H..., B... and T3..
1 Pt 100 resistance thermometer
For a detailed illustration of the gear unit and the position of the add­on parts, please refer to the drawings
of the gear­unit documentation.
When operating and servicing the components, observe the operating instructions
relating to the components.
For technical data, refer to the data sheet and/or the list of equipment.
5.13 Oil­level monitoring system
Depending on the order specification, the gear unit can be fitted with an oil­level monitor in the form of
a level limit switch. This monitoring is designed as a standstill monitoring (gear unit stop) and checks the
level of the oil before the unit is started up. When the signal "oil level too low" is given, it should be wired
in such a way that the drive motor cannot start and an alarm is given. During operation, any signal should
be bridged.
If an the oil­level monitoring device is in use, it is very important that the unit is in a horizontal position.
H... / B... / T3.. ≤ 12 H... / B... ≥ 13
Fig. 34: Oil­level monitoring on gear units types H..., B... and T3..
For a detailed illustration of the gear unit and the position of the add­on parts, please refer to the drawings
of the gear­unit documentation.
When operating and servicing the components, observe the operating instructions
relating to the components.
For technical data, refer to the data sheet and/or the list of equipment.