Weir Warman 650 M200-MCR-G, Руководство пользователя, Страница: 203 / 287

68 / 89
BA 5010 EN 03.10
6.13 Gear units with cooling coil
• Before connecting the cooling coil the screw plugs must be removed from the connecting bushes.
• Flush the cooling coil (in order to remove any contamination).
• Connect the cooling­water in­ and outflow pipes (for exact position of the connections, see dimensioned
drawing).
Observe also item 5.10.2.
6.14 Gear unit with add­on components
• For the technical data to the add­on components, as stated in item 6.15 to 6.21, refer to the order­specific
list of equipment.
• The electrical equipment for regulation and control must be wired in accordance with the equipment
suppliers' instructions.
• For operation and maintenance the operating instructions provided specifically for the order and the
specifications in items 5.10.2 to 5.15 must be observed.
6.15 Gear units with air oil­cooler
• Connect the contamination indicator for switchover filter (for gear sizes ≥ 13) and pressure monitor
electrically.
• Connect the fan motor electrically.
6.16 Gear units with fitted water oil­cooler
• Before connecting the water oil­cooler remove the plugs from the cooling­water connections.
• Flush the water oil­cooler (in order to remove any contamination).
• Install the cooling­water in­ and outflow pipes (for flow direction and exact position of connections, see
dimensioned drawing).
Make sure when installing the piping that no forces, moments or vibrations act
upon the connections of the water oil­cooler.
• Wire the pressure monitor electrically (in case of gear units with corresponding equipment only).
Observe also item 5.10.4.
6.17 Gear unit with heating element
• Wire heating elements electrically.
6.18 Gear unit with oil-temperature monitoring system
• Wire resistance thermometer with evaluating instrument (to be provided by customer) electrically.
6.19 Gear unit with oil­level monitoring
• Wire the level­limit switch electrically.
• Wire oil­level monitor electrically.
6.20 Bearing­monitoring system
• The bearing monitoring device must be fitted by the customer.
6.21 Gear unit with speed transmitter
• Wire speed transmitter electrically.