Weir Warman 650 M200-MCR-G, Руководство пользователя, Страница: 281 / 287

6.1 Assembly
Before assembly of the oil-air cooling unit ensure that all
basic requirements for an unhindered operation of the plant
according to this operating instruction are fulfilled!
Safety instructions of 2.0 must be complied with!
The plant operator has to assemble and start the plant in
strict accordance with the valid rules for pressure equipment
and machinery (Europe: EU pressure equipment directive 97/
23/EC, machinery directive 98/23/EC), hazardous fluids as
well as well as operating safety and accident prevention.
Assembly of the cooling unit, especially preparation of
electrical connections is allowed only by specialists!
Horizontal or vertical assembly of the oil/air cooling unit is
possible. (see figure 5).
In case of horizontal fitting position with the end of the motor
facing upwards, a protective shield must be placed above the
motor in any case.
The oil-air cooling unit must be fixed at 4 points at least on a
flat foundation (figure 6).
Fixing should be strainless and vibration-free (possibly use
vibration isolators)
Connections ( electric and hydraulic ) must also be
strainless and vibration-free.
Before assembly remove protective plugs from fluid
connections!
Unless described otherwise in the technical order
specification, keep a distance to any foreign objects in the
suction range of at least approx. half the height of the cooling
unit!
- 7 -
6.0 Assembly, putting into service
5.0 Transportation instruction
Preferably the FUNKE oil-air cooling units are transported –
lying on the cooler core - on wooden pallets, properly
fastened not to slip. (figure 3)
Bigger oil-air cooling units series OKAN II require lifting
devices for transport and assembly.
In case of hanging transport please do not use bright steel
ropes or chains but sheathed suspension ropes! (figure 4)
Suspension ropes to be passed through both frame hoops.
Lift slowly. The centre of gravity is not exactly below hanger
fixtures and the cooling unit is swinging!
figure 3 figure 4
Figure 5
Figure 6
BA FUN.OLK.001 EN 10.08
7/12