Weir Warman 650 M200-MCR-G, Руководство пользователя, Страница: 247 / 287

This technical document is our property. All copying or
forwarding to third parties has consequences under civil and
criminal law.
Denomination:
Date:
Weltestraße 3
88250 Weingarten
Drawing no.: Article no. Page:
Brief description / Operating instructions
STOZ pump (foot / flange / flange, vertical)
Type N / KSW
13.08.07
1/4
1. General
These operating instructions contain basic information on installation, commissioning,
operation and maintenance of STOZ lubricating oil pumps.
Intended use:
STOZ lubricating oil pumps are used to pump lubricating, non-corrosive fluids.
Pump data and operating conditions:
Technical specifications of the individual pumps are documented in the associated
drawing or data sheet.
Identification of the STOZ pump:
Each pump is with marked with the following information:
• Article number
• Serial number
• Date of manufacture
• Marking of fluid connections:
S
S
for suction connection
D
D
for pressure connection
2. Safety
In addition to the special safety instructions listed in the following, the valid national safety and
accident prevention regulations for handling machinery and technical equipment are to be
observed.
Failure to observe the safety instructions may involve a danger to persons, the environment
and the machine and to loss of all claims for compensation.
Information attached to the pump itself such as type plate, arrow indicating direction of rotation,
marking of fluid connections, must always be observed and kept in legible condition.
Qualification of personnel:
The personnel for installation, operation and maintenance must have appropriate qualifications
to carry out this work. The owner of the machine must ensure that the personnel is familiar with
and fully understands the contents of the operating instructions.
Safety instructions for the owner:
• If hot or cold machine parts lead to dangers, these parts must be protected against contact
by the owner.
• In the case of moving parts (e.g. belt drives, couplings), appropriate guards against contact
B 5959 EN 08.07
1/4