ViaSat ArcLight Скачать руководство пользователя страница 232

Страница: 232 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

3-162 1081006

Rev.

001

Virtual Output Power (dBm):

This field displays the virtual output

power.

Satellite/Delay Panel

Satellite:

Select the satellite from the drop down list.

Minimum Round Trip Delay (ms):

This field displays the minimum

round trip delay for the satellite.

Maximum Round Trip Delay (ms):

This field displays the maximum

round trip delay for the satellite.

Network Panel

Gateway IP Address:

This field displays the Gateway IP address for the

hub canceller.

Trap Destination IP Address:

This field displays the Trap Destination

IP Address for the hub canceller.

OK button

– is used to load new information into the database, activate

the new information, close the window and return to the Log Manager
window.

Apply:

Select Apply to accept and implement changes.

Cancel button

– is used to discard the information entered on the

Logging Configuration screen, revert to the database information at the
start of the editing session, close the Logging Configuration screen, and

revert to the Log Manager window.

Содержание ArcLight

















































































































































































































































































































































































Результаты поиска

Содержание ArcLight

Отзывы:

ViaSat ArcLight, Руководство пользователя, Страница: 232 / 368

Результаты поиска

Содержание ArcLight

Отзывы: