ViaSat ArcLight Скачать руководство пользователя страница 173

Страница: 173 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

Rev. 001

1081006

3-103

Operator

– The operator can generally read and write files but

can not grant access.

Guest

– The guest typically would be given read-only access to a

limited set of elements in a network.

Account Disabled

– this check box is used to disable the

account. The check box will not function for users without the
authority to disable the account.

Associated Custo…

: If there is a customer associated with this user,

select them from the pull down list.

OK button

– This button is used to write the new information to the

database, close the Authority Level Configuration screen, and return to

the

User Manager

screen.

Cancel button

– This button is used to discard the changes made

during the editing session, close the Authority Level Configuration

window, and return to the

User Manager

screen.

Содержание ArcLight

















































































































































































































































































































































































Результаты поиска

Содержание ArcLight

Отзывы:

ViaSat ArcLight, Руководство пользователя, Страница: 173 / 368

Результаты поиска

Содержание ArcLight

Отзывы: