ViaSat ArcLight Скачать руководство пользователя страница 204

Страница: 204 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

3-134 1081006

Rev.

001

VLAN ID

–If the entry indicates a virtual interface, the VLAN ID is

displayed here; otherwise, “N/A” is displayed, indicating the entry is for

a physical interface. Note that only the MCD-II supports virtual
interfaces.

Add

– Click this button to add an interface.

Delete

– Highlight an interface in the list by clicking on it, then click

this button to delete it.

OK button

– Does same thing as Apply button, but also closes the

current screen.

Apply button

– When clicked, causes any new values entered in all

fields on all tab screens to be stored in the NMS memory and
subsequently sent to the MCD. The current screen will remain open.

Cancel button

– When clicked, causes any new values entered in the

fields on any

Tab

screen to be discarded, closes the current screen, and

reverts to the next higher-level screen in the hierarchy. The next time

the screen is opened the values that existed before the current editing
session will appear. The Cancel button will not undo use of the OK or

Apply buttons.

Содержание ArcLight

















































































































































































































































































































































































Результаты поиска

Содержание ArcLight

Отзывы:

ViaSat ArcLight, Руководство пользователя, Страница: 204 / 368

Результаты поиска

Содержание ArcLight

Отзывы: