ViaSat ArcLight Скачать руководство пользователя страница 133

Страница: 133 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

Rev. 001

1081006

3-63

Figure 3-42. Hub Status Screen, Utilization Tab, Forward Links Tab.

Hub Status - Utilization Tab:

The Utilization Tab has tab screens that are presented and
explained below:

Forward Links tab:

ID:

This field is the ID number of the forward link.

Name:

This field displays the assigned name of the forward link.

Transponder:

This identifies the transponder to which the forward link

is assigned.

Satellite:

This field identifies the satellite to which the forward link is

assigned.

Num VMTs:

This field displays the number of logged-in VMTs assigned

to the forward link.

Kbps:

This field displays a measurement in kbps (kilobits per second)

of the amount of traffic currently being sent over the forward link.

Packets per Sec.:

This field displays a measurement in packets per

second of the amount of traffic currently being sent over the forward
link.

Содержание ArcLight

















































































































































































































































































































































































Результаты поиска

Содержание ArcLight

Отзывы:

ViaSat ArcLight, Руководство пользователя, Страница: 133 / 368

Результаты поиска

Содержание ArcLight

Отзывы: