ViaSat ArcLight Скачать руководство пользователя страница 223

Страница: 223 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

Rev. 001

1081006

3-153

3.3.16.5.1 FLM Configuration Screen

Figure 3-92. FLM Configuration Screen.

FLM Configuration Screen:

Forward Link Profile

: Select the Forward Link Profile from the pull

down list.

Gateway IP

: This field displays the Gateway IP Address.

Trap Destination IP

: This field displays the Trap Destination IP

Address.

Trap Send Level

: Select the Trap Send Level from the pull down list.

OK button

– is used to load new information into the database, activate

the new information, close the window and return to the previous
window.

Apply:

Select Apply to accept and implement changes.

Cancel button

– is used to discard the information entered, revert to

the database information at the start of the editing session, close the

screen, and revert to the previous window.

Содержание ArcLight

















































































































































































































































































































































































Результаты поиска

Содержание ArcLight

Отзывы:

ViaSat ArcLight, Руководство пользователя, Страница: 223 / 368

Результаты поиска

Содержание ArcLight

Отзывы: