ViaSat ArcLight Скачать руководство пользователя страница 137

Страница: 137 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

Rev. 001

1081006

3-67

Figure 3-44. Hub Status Screen, Utilization Tab, Congestion Control Groups Tab.

Hub Status - Utilization Tab:

Congestion Control Group tab:

Group ID :

This field lists the Congestion Control Group (CCG) ID

number.

Name:

This field lists the name of the CCG.

Transponder:

This field lists the name of the transponder to which the

return links comprising the congestion control group have been
assigned.

Satellite:

This field lists the name of the satellite to which the return

links comprising the congestion control group have been assigned.

Cur. Access Lvl.:

This field displays the current access level

(utilization rate) calculated over all return links assigned to the
congestion control group.

Содержание ArcLight

















































































































































































































































































































































































Результаты поиска

Содержание ArcLight

Отзывы:

ViaSat ArcLight, Руководство пользователя, Страница: 137 / 368

Результаты поиска

Содержание ArcLight

Отзывы: