ViaSat ArcLight Скачать руководство пользователя страница 140 | Manualshive

Страница: 140 / 368

ViaSat ArcLight Скачать руководство пользователя страница 140

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

3-70 1081006

Rev.

001

System Panel:

Hub System Ctrl. Address:

Displays control address for the hub

system.

Hub Latitude (°):

Displays the hub Latitude in degrees.

Hub Longitude (°):

Displays the hub longitude in degrees.

Routing and Transport Panel

Network Routing Mode:

Select network routing mode from the pull

down menu. This field specifies the forwarding mode to be used for data
traffic. It may be configured to one of the following values:

0 = Direct IP Mode

1 = Hub and Spoke Mode

2 = None

Network Transport Mode:

Select the Network Transport mode from

the options displayed in the pull down menu.

NOC Address:

Displays the address of the NOC.

Hub Address:

Displays the address of the hub.

DHCP Pool Panel:

Source File:

The name of the source file documenting the IP addresses

available for assignment to computers on the Terminal’s local network

from the DHCP pool allocated to the transceiver by the RtNMS.

Select…:

Clicking the Select button accepts the displayed or highlight

source file.

Range Start/Mask | VMT Mask:

This table displays a list of mask

entries contained in the source file displayed.

OK

– Click on this button to close the screen.

Apply

– Click on this button to apply the entries just made, and store

the new data in memory. The current screen will remain open. A pop-

up error message will be displayed to warn the user if any information,
required for the process being edited, is missing or out of an allowed
range. Clicking OK and Apply will send data to the NMS Server (if

applicable).

Cancel

– Click on this button to erase any new entries made on the

open screen, close the current screen and revert to the next higher-level

screen in the hierarchy. The next time the screen is opened the values
that existed before the current editing session will appear. The Cancel
button will not undo use of the OK or Apply buttons.

«
...
138
139
140
141
142
...
»

Содержание ArcLight

















































































































































































































































































































































































Отзывы:

Нет отзывов