manualshive.com logo in svg

Vacon 100 flow, Руководство по применению, Страница: 310 / 386

Поделиться
Скачать
Vacon 100 flow Скачать руководство пользователя страница 310

P3.13.5.9 SP2 WAKE UP LEVEL (ID 1077)

Use this parameter to set the level at which the drive wakes up from the sleep state.

P3.13.5.10 SP2 WAKE UP MODE (ID 1020)

Use this parameter to select the operation for the wake up level parameter.

P3.13.5.11 SP2 SLEEP BOOST (ID 1794)

Use this parameter to set the value that is added to the actual setpoint value when the sleep

boost function is used.

P3.13.5.12 SP2 SLEEP BOOST MAXIMUM TIME (ID 1796)

Use this parameter to set the timeout time for the sleep boost function.

10.14.6 FEEDBACK SUPERVISION

Use the feedback supervision to make sure that the PID Feedback value (the process value

or the actual value) stays in the set limits. With this function you can, for example, find a pipe

break and stop the flooding.

These parameters set the range in which the PID Feedback signal stays in correct

conditions. If the PID Feedback signal does not stay in the range, and this continues longer

than the delay, a Feedback supervision fault (the fault code 101) shows.

P3.13.6.1 ENABLE FEEDBACK SUPERVISION (ID 735)

Use this parameter to enable the feedback supervision function.

Use the feedback supervision to make sure that the PID feedback value stays in the set

limits.

VACON · 310

PARAMETER DESCRIPTIONS 

10 

LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

Содержание 100 flow



































































































































































































































































































































































































Отзывы:

Нет отзывов