manualshive.com logo in svg

Vacon 100 flow, Руководство по применению, Страница: 217 / 386

Поделиться
Скачать
Vacon 100 flow Скачать руководство пользователя страница 217

10

PARAMETER DESCRIPTIONS

In this chapter, you can find information on all the parameters of your VACON

®

 100

application. If other information is necessary, see chapter 5 Parameters menu or contact your

nearest distributor.

P1.2 APPLICATION (ID212)

Use this parameter to select the application configuration for the drive.

The applications include preset application configurations, that is, sets of predefined

parameters. The selection of the application makes the commissioning of the drive easy and

reduces the manual work with the parameters.

When the value of this parameter changes, a group of parameteres get their preset values.

You can change the value of this parameter when you make the start up or the

commissioning of the drive.

If you use the control panel to change this parameter, an application wizard starts and helps

you to set the basic parameters related to the application. The wizard does not start, if you

use the PC tool to change this parameter. You can find data about the application wizards in

Chapter 2 Wizards.

These applications are available:

0 = Standard

1 = HVAC

2 = PID control

3 = Multi-pump (single drive)

4 = Multi-pump (multidrive)

NOTE!

When you change the application, the contents of the Quick Setup menu change.

10.1

TREND CURVE

P2.2.2 SAMPLING INTERVAL (ID 2368)

Use this parameter to set the sampling interval.

P2.2.3 CHANNEL 1 MIN (ID 2369)

This parameter is used in scaling by default.

Adjustments can be necessary.

P2.2.4 CHANNEL 1 MAX (ID 2370)

This parameter is used in scaling by default.

Adjustments can be necessary.

PARAMETER DESCRIPTIONS 

VACON · 217

LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

10 

Содержание 100 flow



































































































































































































































































































































































































Отзывы:

Нет отзывов