manualshive.com logo in svg

Vacon 100 flow, Руководство по применению, Страница: 15 / 386

Поделиться
Скачать
Vacon 100 flow Скачать руководство пользователя страница 15

When you control the drive with the I/O terminal, the frequency reference signal is connected

to AI1 (0…10V) or AI2 (4…20mA). The connection is specified by the type of the signal. There

are also 3 preset frequency references available. You can activate the preset frequency

references with DI4 and DI5. The start and stop signals of the drive are connected to DI1

(start forward) and DI2 (start reverse).

It is possible to configure all the drive outputs freely in all the applications. There are 1

analogue output (Output Frequency) and 3 relay outputs (Run, Fault, Ready) available on the

basic I/O board.

See the descriptions of the parameters in 10 Parameter descriptions.

QUICK STARTUP GUIDE 

VACON · 15

LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

1 

Содержание 100 flow



































































































































































































































































































































































































Отзывы:

Нет отзывов