Vacon 100 flow Скачать руководство пользователя страница 111

Страница: 111 / 386

NOTE!

The Multimonitor menu is not available in the text display.

TREND CURVE

The Trend curve function is a graphical presentation of 2 monitor values at the same time.

See 4.1.2 Trend curve.

BASIC

The basic monitoring values can include statuses, measurements, and the actual values of

parameters and signals. See 4.1.3 Basic.

I/O

You can monitor the statuses and levels of the values of input and output signals. See 4.1.4

I/O.

TEMPERATURE INPUTS

See 4.1.5 Temperature inputs.

EXTRAS/ADVANCED

You can monitor different advanced values, for example fieldbus values. See 4.1.6 Extras and

advanced.

TIMER FUNCTIONS

You can monitor the timer functions and the Real Time Clock. See 4.1.7 Timer functions

monitoring.

PID CONTROLLER

You can monitor the PID controller values. See 4.1.8 PID controller monitoring.

EXTERNAL PID CONTROLLER

You can monitor the values that are related to the external PID controller. See 4.1.9 External

PID controller monitoring.

MULTI-PUMP

You can monitor the values that are related to the operation of more than 1 drive. See 4.1.10

Multi-pump monitoring.

MAINTENANCE COUNTERS

You can monitor the values related to the maintenance counters. See 4.1.11 Maintenance

counters.

FIELDBUS DATA

You can see the fieldbus data as monitor values. Use this function, for example, during the

USER INTERFACES

VACON · 111

LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

Содержание 100 flow



































































































































































































































































































































































































Результаты поиска

Содержание 100 flow

Отзывы:

Vacon 100 flow, Руководство по применению, Страница: 111 / 386

Результаты поиска

Содержание 100 flow

Отзывы: