Tieline Genie Distribution, Руководство пользователя, Страница: 78 / 426

78 Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
18.5 Steps to Connect over POTS
The following procedure explains how to create a custom peer-to-peer program and dial another
Tieline codec over POTS using the front panel keypad and navigation buttons.
Important Notes:
· See POTS Connection Tips and Precautions for valuable information about setting up
and maintaining reliable POTS connections.
· See POTS Module Settings for details on module settings.
· See POTS Answering Configuration for details on POTS answering settings (required for
answering calls from non-Tieline POTS codecs)
· See Configuring POTS for details on configuring codec connections via a computer.
· The Local and Remote line quality displayed for POTS Codec connections is related to
the actual POTS line quality at either end of the link. This reading affects the maximum
allowable bit rate when the codec is training and negotiating a connection.
1. Press and press and release the right arrow button to open the Input Audio Level
adjustment screen.
·
Press the number on the keypad corresponding to the channel you want to toggle on or off.
E.g. press on the numeric keypad to toggle channel 1 on and off.
·
Use the up and down navigation buttons to select the gang function and press the
button to toggle ganging on/off.
·
Use the up and down navigation buttons to select a single channel, or ganged channels.
Note: A channel is highlighted when selected.
· Use the left and right navigation buttons to adjust the input levels up or down.
2. Press the HOME button to return to the Home screen, select Connect > POTS and press
the button.
3. Use the RETURN button to delete any numbers if already entered, then use the numeric
KEYPAD to enter the number you want to dial. Note: When POTS (Ready) is displayed
throughout POTS menus it means the POTS module has initialized and is ready to accept or
make a call.
4. Navigate to Setup and press the button.