Tieline Genie Distribution, Руководство пользователя, Страница: 193 / 426

193
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
the program with default settings, or click Next to specify algorithm settings and
configure a backup connection if required (recommended).
Dialing configuration settings for this POTS audio stream are now complete.
Configuring a Failover Connection or Auto Reconnect
At this point in the wizard you can choose to configure Auto Reconnect or create a failover
connection for the audio stream you are configuring.
Important Note: When Auto Reconnect is enabled, the dialing codec will continue to
attempt a connection with the remote codec until Disconnect is pressed either on the
dialing codec's keypad, or in the Web-GUI.
To configure a backup connection:
1. Click to select the check-box for Create a Failover Connection . Adjust the parameters
and click Next .
Important Note: When Failover is enabled, the codec will fail over to a backup
connection under the following circumstances:
·
There is sudden loss of connectivity to the primary destination.
·
The remote codec disconnects the primary connection.
·
The user manually attempts to connect to the failover connection.
·
When the conditions for failover are triggered by the Failover Parameters .
The codec will always attempt Failback if any of the following conditions are met:
·
There is sudden loss of connectivity to the backup destination.
·
The remote codec disconnects the backup connection.
·
The user manually attempts to connect to the primary connection.