Tieline Genie Distribution, Руководство пользователя, Страница: 260 / 426

260 Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
For ISDN settings are determined by ISDN module answering settings. For more details
see Configuring ISDN Answering.
For POTS, settings are determined by POTS module answering settings. For more
details see
Configuring POTS Answering .
4. After configuring all settings there are 3 options:
i. Select the check-box for Create another answering connection and continue
through the wizard.
ii. Click Next to configure Output Audio Source options.
iii. Click Next Stream to configure the next audio stream's settings.
5. Continue through the program wizard and configure all 6 connections, then click Save Program
to save program settings and click Finish to exit the wizard.
Important Note: The default answering program uses audio port 9020 for a third audio
stream IP connection. Default ports for mono connections 3 to 6 are 9020, 9030, 9040
and 9050. If you need to change this setting on your dialing codec, or in the Report-IT
smartphone application, this will need to be adjusted accordingly in the answering
codec.
6. The newly created program can be loaded from within the Program Manager panel and
Connections panel . Select and connect audio streams in a program using the Connections
panel , or connect the program manually using the codec front panel.