Tieline Genie Distribution, Руководство пользователя, Страница: 55 / 426

55
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
Caution: Don't forget to navigate up to Apply Settings and press the button to apply all
module settings before leaving this menu!
13.2 POTS Answering Configuration
Connection setting preferences are normally exchanged via session data sent between two Tieline
codecs when a connection is established. If you answer a call from a non-Tieline codec you will
need to create an answering "Config" to determine the settings used when connecting, and
designate which module will answer the call (if more than one POTS module is installed).
Important Notes:
·
POTS Answer Config settings are applied to POTS Codec connections and not
Analog Phone connections.
·
When receiving a call from a Tieline codec sending session data (i.e. not a
Sessionless connection), the algorithm setting from the dialing codec overrides the
setting in the POTS Answer Config menu.
·
The default POTS Answer Configs accept a call from an incoming Tieline codec with
session data enabled. They will also answer a call from a Comrex POTS codec by using
the
Other algorithm.
·
For more information about POTS answering parameters, including 'route' configuration,
please see
Configuring POTS Answering in the HTML5 Toolbox Web-GUI manual.
1. Press the the SETTINGS button, then navigate to Answering and press the button.
2. Navigate to POTS Answer Configs and press the button.
3. Navigate to Config 1 and press to configure a POTS module in module slot 1 , or navigate to
Config 2 and press to configure a POTS module in module slot 2 .
4. Select Info to view current settings or Edit to adjust Config settings, then press the button.
5. Select Disable when connecting to Tieline codecs using session data, or select Enable if
connecting to non-Tieline codecs only, then press the button.