Tieline Genie Distribution Скачать руководство пользователя страница 269

Страница: 269 / 426

269

© Tieline Research Pty. Ltd. 2020

Genie Distribution WNET Manual v3

7. Click

Next stream

to configure the next audio stream.

Configure the Second Multi-unicast Audio Stream

1. Click

Next Stream

to configure the second multi-unicast audio stream.

2. Enter the name of the first connection for this audio stream in the text box, then click

Next

3. Continue through the program wizard and configure all multi-unicast connections for this audio

stream. After all connections are configured there are two options:

Click

Next

to configure the

Output Audio Source

for the audio stream.

Click

Save Program

to save the currently configured settings.

4. Click

Save Program

to save the program settings, then click

Finish

Important Notes:

Configure new audio streams and connections as required for

3 x

Multi-unicast

6 x Multi-unicast

programs. Following are the default ports used when

configuring up to 6 multi-unicast audio streams (up to 60 connections supported in total):

Audio Stream 1:

Audio Send Port 9000

Audio Stream 2:

Audio Send Port 9010

Audio Stream 3:

Audio Send Port 9020

Audio Stream 4:

Audio Send Port 9030

Audio Stream 5:

Audio Send Port 9040

Audio Stream 6:

Audio Send Port 9050

5. The newly created program can be loaded from within the

Program Manager panel

and

Connections panel

Select and connect audio streams

in a program using the

Connections

panel

, or connect the program manually using the codec front panel.

Содержание Genie Distribution











































































































































































































































































































































































































































Результаты поиска

Содержание Genie Distribution

Отзывы:

Tieline Genie Distribution, Руководство пользователя, Страница: 269 / 426

Результаты поиска

Содержание Genie Distribution

Отзывы: