Tieline Genie Distribution, Руководство пользователя, Страница: 351 / 426

351
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
· VLAN interfaces have features similar to physical Ethernet interfaces. However, your
network administrator will need to configure VLAN support throughout your network for
them to be supported in your codec.
Reconfigure Default Primary, Secondary and Tertiary Interfaces
It is possible to reconfigure the default Primary (Ethernet 1), Secondary (Ethernet 2) and
Tertiary (Wi-Fi) interfaces in the codec. As an example, you may want to select Primary as
the dialing interface in a program and then copy this program onto multiple codecs. However,
the actual primary interface used at each location can vary for each codec. For one codec it
may be an Ethernet port and for another it may be a Wi-Fi interface. This allows you to
configure site-specific settings to suit available network interfaces at different remote locations.
1. Press the SETTINGS button.
2. Use the navigation buttons to select System and press the button.
3. Navigate to IP Via Setup and press the button.
4. Navigate to the
Primary , Secondary or Tertiary IP Via interface setting and press the
button.
5. Select an alternative default interface and press the button.
6. Press the Return button to navigate back out of the menu, then navigate to Yes
in the Warning dialog and press the button to save all changes.
Important Note: Fuse-IP cannot be configured as a default Primary, Secondary or
Tertiary Via .