Tieline Genie Distribution, Руководство пользователя, Страница: 176 / 426

176 Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
6. Configure the transport settings for the connection, then click Next. Note: Select Enable
Auxiliary Data to enable synchronized out-of-band data in separate packets using any
algorithm.
Important Notes:
· If you select Sessionless as the Session Protocol select UDP/IP +RTP for RFC-
compliant IP streaming.
· See RS232 Data Configuration for detailed information on RS232 data and see Enabling
Relays and RS232 Data for more information on relay operations.
7. Configure destination codec dialing and encoding settings:
For IP connections configure the IP address, ports, and then specify which streaming
interface is used to dial this connection, e.g.
Primary (port ETH1 ) or Secondary (port
ETH2 ). Note: By default Any will select ETH1 if it is available and ETH2 if it is unavailable.
Important Note: The Remote Audio Port is the codec port at the remote end
of the link to which you are sending audio. The Local Audio Port is used by
the local codec to receive audio from the remote codec. When Tieline Codecs
is the Session Protocol selected (using Tieline session data), the default port
value for the Local Audio Port is Automatic . Note: Automatic indicates that
the codec will arbitrarily allocate the local port value and send this information
to the codec to which you are dialing. Click to deselect the
Automatic check-
box and change this setting. When you select Sessionless as the Session
Protocol , the Session Port is not configurable and you can manually
configure the Remote Audio Port and Local Audio Port .
If TieLink Contact List dialing is configured: