Tieline Genie Distribution, Руководство пользователя, Страница: 225 / 426

225
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
1. Click to select the check-box for Create a Failover Connection . Adjust the parameters
and click Next .
Important Note: When Failover is enabled, the codec will fail over to a backup
connection under the following circumstances:
· There is sudden loss of connectivity to the primary destination.
· The remote codec disconnects the primary connection.
· The user manually attempts to connect to the failover connection.
· When the conditions for failover are triggered by the Failover Parameters .
The codec will always attempt Failback if any of the following conditions are met:
· There is sudden loss of connectivity to the backup destination.
· The remote codec disconnects the backup connection.
· The user manually attempts to connect to the primary connection.
The explanations within the following table can be used to assist with failover connection
configuration.
Screen Display Description
1 Threshold The percentage of lost data measured during a given time
frame
2 Time Frame The time frame against which lost data is measured
3 Keep Alive The keep connection alive time before failing over to a
backup connection; Tieline RTP pings every second to
confirm connectivity
4 Enable Automatic Failback Select the check-box to fail back to a higher priority
connection when failback parameters are met
5 Stable Time The amount of time a primary connection must remain
stable before attempting to fail back from the backup
connection
6 Maximum Retries The maximum number of fail back retries a codec can try
before ending fail back attempts
7 Time Frame The time frame used to measure the number of fail back
retries attempted