Tieline Genie Distribution, Руководство пользователя, Страница: 377 / 426

377
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
5. Use the down navigation button to select Setup and press the button.
6. Navigate to either Session (session protocol) or Protocol (audio protocols) and press .
7. Select the session or audio port you want and press .
8. Use the numeric KEYPAD to add a new port number and press .
Changing Tieline Session Ports when Answering
To adjust the local Tieline session data port used by your codec:
1. Press the HOME button to return to the Home screen.
2. Use the navigation buttons on the front panel to select Settings and press the button.
3. Select Tieline Session and press .
4. Navigate to Session Port or Alternative Session Port and press .
5. Adjust the setting and press the button to store the new configuration.
Audio Port Settings for Tieline Session Data and Sessionless IP Calls
The codec supports sessionless IP streaming, whereby the codec does not send Tieline session
data when attempting to connect. When using this mode you need to configure the "send" audio
port (codec port at the remote end of the link to which you are sending audio) and "return" audio port
(port used by the local codec to receive audio from the remote codec).
It is also possible to configure the remote and local audio ports for a codec using Tieline session
data to establish IP connections. This may be required because some firewalls require symmetric
port configuration.
Sessionless Audio Port Configuration
When you select Sessionless as the Session Protocol :
· The default value for both the Local and Remote (audio) Ports is 9000
· The range of values for the audio ports is 2000 to 65535
· The audio port values can be set independently
· Both audio ports can always be configured, i.e. there is no dependency on
encode/decode direction
"Tieline Codec" Port Configuration
If using the Tieline Codec setting for call establishment (i.e. Tieline session data is enabled),
you can also change the default audio ports if required.
· The default value for the Remote Audio Port is 9000
· The range of values for the Remote Audio Port is 2000 to 65535
· The default port value for the Local Audio Port is Automatic . Note: Automatic
indicates that the codec will allocate the local port value and send this information to the
codec to which you are dialing
· The range of values for the Local Audio Port is 2000 to 65535
Sessionless Multicast Connections
For a sessionless multicast server connection: