Tieline Genie Distribution, Руководство пользователя, Страница: 208 / 426

208 Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
1. Auto (default): The answering codec will route incoming calls on a first come first
served basis.
2. Channel 1 : The answering codec will always route incoming calls to codec
Channel 1 (left output).
3. Channel 2 : The answering codec will always route incoming calls to codec
Channel 2 (right output).
5. This audio stream connection in the wizard will configure the codec to connect the first audio
stream. Enter the name of the connection in the text box, then click Next .
6. Configure the transport settings for the connection, then click Next. Note: Select Enable
Auxiliary Data to enable synchronized out-of-band data in separate packets using any
algorithm.
Important Note: See RS232 Data Configuration for detailed information on RS232 data
and see Enabling Relays and RS232 Data for more information on relay operations.
7. Configure destination codec dialing and encoding settings:
For IP connections configure the IP address, ports, and then specify which streaming
interface is used to dial this connection, e.g.
Primary (port ETH1 ) or Secondary (port
ETH2 ). Note: By default Any will select ETH1 if it is available and ETH2 if it is unavailable.
Important Note: The Remote Audio Port is the codec port at the remote end
of the link to which you are sending audio. The Local Audio Port is used by
the local codec to receive audio from the remote codec. When Tieline Codecs
is the Session Protocol selected (using Tieline session data), the default port