Tieline Genie Distribution, Руководство пользователя, Страница: 261 / 426

261
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
20.19
Configure Multi-Unicast Dialing Programs
Genie Distribution can also simultaneously broadcast up to 3 different stereo multi-unicast audio
streams, or 6 mono multi-unicast audio streams to a maximum of 60 endpoints in total. For
example, six separate streams can each be sent to 10 endpoints. The first connection from each
multi-unicast audio stream is capable of bidirectional audio. The following diagram shows 3
simultaneous multi-unicast audio streams broadcasting to multiple endpoints.
Important Notes: Before you start program configuration please note:
·
You cannot edit a program when it is currently loaded in the codec.
·
Lock a loaded custom program or multistream program in a codec to ensure it
cannot be unloaded by a codec dialing in with a different type of program. For
example, if a multistream program is not locked it will be unloaded by a mono or
stereo call.
·
If a codec supports multiple stream programs and the Auto (default) reference level
is selected, the first codec to connect will configure the reference level used for all
subsequent connections. I.e. If a G3 codec connects first then the G3 Audio
Reference Level will be configured for all connections.
·
All streams must be dialed initially for a multi-unicast program. Streams can be
disconnected and dialed individually after this.
·
Connections are "dial only" for multi-unicast programs.
·
Some drop-down menus and settings may be greyed out intentionally depending on
features available.
·
It is possible to save a program at several points throughout the program wizard and
use default settings to save configuration time. The first connection in each multi-
unicast stream determines default settings (e.g. algorithm, sample rate, bit rate), for
all subsequent connections in that stream, except for dialing settings.
·
All algorithms are supported for multi-unicast connections, however only one can be
used for each audio stream.
·
Bidirectional audio is only available on the first connection dialed for each audio
stream.
·
Renegotiation of connection bit rates is not possible when connected.