Tieline Genie Distribution, Руководство пользователя, Страница: 66 / 426

66 Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
answer and dial if required. A backup dialing connection is configured in case the primary
connection fails.
Creating Programs
Only the simplest peer-to-peer (point-to-point) programs can be created using the codec front panel.
The HTML5 Toolbox Web-GUI contains a
Program Manager panel with a wizard for configuring
program settings and backup connections. See Using the HTML5 Toolbox Web-GUI for more
detailed information on setting up mono, stereo and multiple stream programs. Edit settings easily
at the touch of a button and use existing programs as templates for creating other programs.
Mono and Stereo Peer-to-Peer Programs
New peer-to-peer programs can be created using the codec front panel keypad (see Steps to
Connect over IP ). If you know the IP address of the codec you want to dial then all you need to
do is enter this into the codec, select your preferred connection settings and then press
CONNECT .
Programs dialed from the front panel are automatically saved as Recent Programs which retain
all audio stream dialing and configuration information. These Recent Programs are displayed
when you press the CONNECT button from within any menu except the IP Mode or SIP
Mode screens, or the Connect IP or Connect SIP screens.
Ensure you configure all the correct connection settings when using the codec front panel,
because these are stored as part of the program's profile when you first connect. They cannot
be adjusted afterwards without using the editing features in the
Program Manager panel
within the HTML5 Toolbox Web-GUI.
Important Note: When configuring a connection use the Save function to save programs
permanently to the codec's Programs menu. Otherwise they are stored to the Recent
Programs list and will be overwritten after several calls have been made.