Tieline Genie Distribution, Руководство пользователя, Страница: 56 / 426

56 Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
Important Note: Select Disable if the codec is expected to receive POTS calls from
Tieline codecs, or both Tieline and non-Tieline codecs (i.e. you are not sure which type of
codec may call). In this mode, once the codec answers a call, it expects to receive
Tieline session data from the caller and configure its own algorithm settings according to
that. If it fails to receive Tieline session data within 5 seconds (e.g. a Comrex POTS
codec is calling), it will use the settings in the
POTS Answering Config instead.
Enable Sessionless Only when answering POTS calls from non-Tieline codecs only.
When Sessionless is configured, the codec will not wait for the session data. This
reduces the time taken to answer an inbound sessionless call.
6. Select Other when connecting to Comrex® Vector, Matrix® and BlueBox® codecs, then press
the button.
Important Note: On the Comrex codec select its "Music" algorithm. Please note that
9.6kbps connections are not supported by the Comrex codecs.
7. If required you can specify the audio stream Route when answering a call from a non-Tieline
codec, then press the button.
8. Select Yes and press the button to confirm the new Config settings.
9. The new Config will be displayed showing the updated settings.
Reset POTS Answer Configs
To reset POTS answering settings to factory defaults: