Tieline Genie Distribution, Руководство пользователя, Страница: 233 / 426

233
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
Important Note: The Remote Audio Port is the codec port at the remote end
of the link to which you are sending audio. The Local Audio Port is used by
the local codec to receive audio from the remote codec. When Tieline Codecs
is the Session Protocol selected (using Tieline session data), the default port
value for the Local Audio Port is Automatic . Note: Automatic indicates that
the codec will arbitrarily allocate the local port value and send this information
to the codec to which you are dialing. Click to deselect the
Automatic check-
box and change this setting. When you select Sessionless as the Session
Protocol , the Session Port is not configurable and you can manually
configure the Remote Audio Port and Local Audio Port .
Click Next Stream to save default algorithm, jitter and FEC settings which are physically
entered in the codec. Alternatively, click Next to specify individual algorithm, jitter buffer
and FEC settings and configure a backup connection or SmartStream PLUS for this
audio stream (recommended).
Note: Session Port 9002 and Remote Audio Port 9000 are used by default for the first
IP audio stream. The audio for this audio steam will use analog or digital inputs and
outputs 1 and 2 for both the dialing and answering codecs. If you need to change default
port settings on the codec from which the call originates, this will also need to be
adjusted in the answering codec using a custom program.
Click the drop-down arrows on the right-hand side of each text box to adjust the
Encoding
,
Sample rate or Bit rate options.
Click to configure:
· Auto Jitter Adapt and the preferred auto jitter setting using the drop-down arrow for
Buffer priority . It is also possible to configure the Minimum depth and Maximum
depth of jitter over the connection. See Configuring the Jitter Buffer for more details.
· Alternatively, select a Fixed Buffer Level and enter the Jitter Depth , which must
be between 12ms and 5000ms depending on the algorithm you select.
· Local and Remote FEC settings if required.