Tieline Genie Distribution, Руководство пользователя, Страница: 39 / 426

39
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
1. Press the SETTINGS button.
2. Navigate to Audio and press .
3. Use the down navigation button to highlight Input Level and press the button.
4. Navigate to the channels you want to gang and press the button.
5. Navigate to the Gang function and press the button to toggle between Enabled or
Disabled.
6. Use the up and down arrow buttons to highlight and select the audio channels.
7. Use the left and right arrow buttons to adjust the levels for both inputs up or down
simultaneously.
8. Press the RETURN or HOME buttons to exit the screen.
Important Note:
·
To gang channels quickly press and press and release the right arrow button to
open the Input Audio Level adjustment screen and follow the preceding instructions.
Intelligent Gain Control (IGC)
The codec's inbuilt DSP limiter automatically takes care of any instantaneous audio peaks that
occur in demanding broadcast situations.
Input IGC (Intelligent Gain Control) is enabled by default
and is automatically activated at +20 dBu (G5 audio scale) and +14dBu (G3 audio scale) to prevent
audio clipping.
There are three settings; Auto , Fixed and Off . If Auto is configured the codec will detect when
incoming audio levels have reduced sufficiently and automatically return input levels to the gain
setting prior to IGC being activated. The codec takes just 250 milliseconds to detect audio levels
have returned to normal (after
IGC Level has been initiated) and will return the levels to the previous
setting within half a second. This response is linear.
To adjust this setting in the codec:
1. Press the SETTINGS button.
2. Navigate to Audio and press .
3.
Navigate to
Input IGC
and press
.
4. Select the channel you want to adjust and
press
.
5. Navigate to the preferred setting and
press
.