Tieline Genie Distribution, Руководство пользователя, Страница: 71 / 426

71
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
Routing Type Options:
Default No Dial Route or Answer Route is configured. An incoming call will be
routed to an audio stream on a first-come, first-served basis in a multi-
stream program. Note: By default IP streams are routed using audio
ports.
Deterministic Select a Dial Route or Answer Route to configure deterministic routing
of multiple audio streams using transports like ISDN or POTS. Use of
Dial and Answer Routes is not usually necessary over IP because
dedicated ports or Line Hunt mode call answering is employed. However
dial routes can be used over IP when a single stream on an answering
codec answers using POTS and/or ISDN connections, as well as IP. This
effectively creates an answering group using different transports. See
Configuring ISDN Answering or Configuring POTS Answering for more
information.
Line Hunt Create line hunt groups for multiple incoming callers on a first come, first
served basis. This is ideal for separating groups of inputs and outputs
between different studios or stations. See
Line Hunt Call Answering for
more information.
10. Navigate to G3 Profile to configure profile settings when dialing a Tieline G3 Codec.
Important Note: The G3 profile setting supports maintaining specific G3 codec settings
when answering a call from a G5 codec.
1. Auto : The codec will dial the G3 codec and connect in mono or stereo. Note: This
is overridden in a ViA codec when a G3 Main + IFB use-case is configured.
2. Dual Program : This allows the codec to dial a G3 codec with a Dual Program
profile loaded and support two simultaneous mono connections.
3. Runtime : The G3 codec will retain runtime settings when answering a call from a
G5 codec.
4. Custom : The G3 codec will load a specified profile, e.g. profile 6, which is the first
custom profile number.
11. Navigate to G3 Channel when connecting to a G3 codec in dual mono mode. This setting lets
you configure which G3 channel (encoder) is used when the G3 codec receives a call from this
codec. E.g.
Channel 1 will route the incoming stream to Encoder 1 on the G3 codec and
Channel 2 will route the incoming stream to Encoder 2 on the G3 codec.
12. When configuration is complete press the RETURN button to navigate backwards to the
Connect IP screen that the IP address was entered into.
Important Note: At this point you can navigate to Save on the Connect IP screen and
press to use the numeric KEYPAD to name the program and press to save the
program.