Tieline Genie Distribution, Руководство пользователя, Страница: 61 / 426

61
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
4. Select Disable to disable the interface before editing settings.
5. Select Edit and then press to individually select and configure SIP interface settings.
6. Navigate to each field in turn and press the button to edit SIP interface settings as required.
7. Select STUN Server and press the button to enter server details if using STUN (Session
Traversal of User Datagram Protocol). Note: UDP Port 3478 is the default port assigned.
8. Select Public IP and press the button if you want to dial over SIP from behind a firewall.
Enter the public IP address and then configure port forwarding to route traffic to the codec's local
IP address behind your firewall. Note: Do not enter a
Public IP address if STUN is configured.
They cannot be used together because both will attempt to use a public IP address over SIP.
STUN settings are prioritized and used if both are configured.
9. The NAT Type used by the firewall is updated if STUN has been enabled and the NAT Type can
be determined.
10. Select Answer Route and use the Change Interface Answer Route screen to route calls
using this SIP interface to a specific audio stream. The route setting in this menu must
correspond with the answering route configured in an audio stream within the loaded program. If
the default value
Any is used then a call will be routed to an audio stream on a first-come-first-
served basis in a multi-stream program.