Tieline Genie Distribution, Руководство пользователя, Страница: 68 / 426

68 Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
18 Getting Connected Quickly
Before attempting a new audio stream connection please connect and adjust the following:
1. Attach power to the codec.
2. For IP connections, attach RJ45 Ethernet cables to at least one of the
ETH ports on the
codec's rear panel. Attach cables to ISDN or POTS modules inserted in your codec as
required.
3. Attach headphones to the 6.35mm (1/4") headphone jack on the codec's front panel.
4. Check that the correct country is selected in the codec.
i.
Press the SETTINGS button.
ii. Navigate to System and press the button.
iii. Navigate to Country and press the button.
iv. Use the navigation buttons to select your country of operation and press the button.
5. Make sure you know the IP address, or line numbers for dialing over ISDN or POTS to the
destination codec.
Important Note: It is important to set the correct country setting for connections over
POTS to adjust the POTS G5 module for varying ring tones and line impedances in
different countries. The country setting also affects whether G.711 µ-Law (North
America/Japan) or A-Law (Europe/Australasia) coding is used over IP, SIP and ISDN
connections.