Tieline Genie Distribution, Руководство пользователя, Страница: 245 / 426

245
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
For IP connections configure the IP address, ports, and then specify which streaming
interface is used to dial this connection, e.g.
Primary (port ETH1 ) or Secondary (port
ETH2 ). Note: By default Any will select ETH1 if it is available and ETH2 if it is unavailable.
Important Note: The Remote Audio Port is the codec port at the remote end
of the link to which you are sending audio. The Local Audio Port is used by
the local codec to receive audio from the remote codec. When Tieline Codecs
is the Session Protocol selected (using Tieline session data), the default port
value for the Local Audio Port is Automatic . Note: Automatic indicates that
the codec will arbitrarily allocate the local port value and send this information
to the codec to which you are dialing. Click to deselect the
Automatic check-
box and change this setting. When you select Sessionless as the Session
Protocol , the Session Port is not configurable and you can manually
configure the Remote Audio Port and Local Audio Port .
Click Next Stream to configure the first audio stream with default algorithm, jitter and
FEC settings which are physically entered in the codec. Alternatively, click Next to
specify individual algorithm, jitter buffer and FEC settings and configure a backup
connection or SmartStream PLUS for this audio stream (recommended).
Note: Session Port 9002 and Remote Audio Port 9000 are used by default for the first
IP audio stream. The audio for this audio stream will use analog or digital input and output
1 for both the dialing and answering codecs. If you need to change default port settings
on the codec from which the call originates, this will also need to be adjusted in the
answering codec using a custom program.
Click the drop-down arrows on the right-hand side of each text box to adjust the
Encoding
,
Sample rate
or
Bit rate
options.
Click to configure: