Tieline Genie Distribution, Руководство пользователя, Страница: 330 / 426

330 Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
5. Click Save to store the new settings.
Note: The following System and Audio alarms are available:
Alarm Alarm
Type Explanation
PSU Failure System Raises an alarm if one or both PSUs fail
Input Silence Audio Raises an alarm if input audio is lost based on whether
silence is detected on a single input, or pair of inputs
(according to preconfigured silence detection threshold
parameters)
Connection Lost Audio Triggers and alarm whenever a streaming connection is
lost
Temperature System Raises an alarm if the temperature is too low or too high
AES Reference Lost Audio Raises an alarm if the AES reference clock signal is lost
(not available in WheatNet-IP capable codecs)
AES Input Lost Audio Raises an alarm if the AES input signal is lost (not
available in WheatNet-IP capable codecs)
Program Failure Audio An element within a configured program has failed and
has not been terminated manually. Note: the alarm is
cleared if the program is unloaded.
Scheduled Event Failed Audio A scheduled event could not be started or stopped at the
specified time. Note: the alarm is only present for the
duration of the event.
ISDN Sync Loss Audio Raises an alarm if ISDN Sync is lost
Configuring Alarm Dissemination Severity Alerts
Codec alarms can be configured for three different severity levels:
1. Click to select an alarm from those displayed in the Configure alarms panel.
2. Click Edit to configure alarm settings.
3. Click the Alarm Severity drop-down menu and select the preferred severity level.