Tieline Genie Distribution, Руководство пользователя, Страница: 177 / 426

177
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
1. Click the Address Book button to select a contact to dial from the TieLink
Address Book .
2. Select the interface options to use on local and remote codecs when dialing
TieLink connections. Note: see Configuring TieLink Settings for more info.
Click Save Program to save the program with the default algorithm, jitter and FEC
settings which are physically entered in the codec. Alternatively, click Next to specify
individual algorithm, jitter buffer and FEC settings and configure a failover connection or
SmartStream PLUS for this audio stream (recommended).
Click the drop-down arrows on the right-hand side of each text box to adjust the
Encoding
,
Sample rate and Bit rate options.
For IP connections click to configure:
· Auto Jitter Adapt and the preferred auto jitter setting using the drop-down arrow for
Buffer priority . It is also possible to configure the Minimum depth and Maximum
depth of jitter over the connection. See Configuring the Jitter Buffer for more details.
· Alternatively, select a Fixed Buffer Level and enter the Jitter Depth , which must
be between 12ms and 5000ms depending on the algorithm you select.
· Local and Remote FEC settings if required.