Tieline Genie Distribution, Руководство пользователя, Страница: 49 / 426

49
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
7. Select Disable when connecting to Tieline codecs using session data, or select Enable if
connecting to non-Tieline codecs only, then press the button.
Important Note: Select Disable if the codec is expected to receive ISDN calls from
Tieline codecs, or both Tieline and non-Tieline codecs (i.e. you are not sure which type of
codec may call). In this mode, once the codec answers a call, it expects to receive
Tieline session data from the caller and configure its own algorithm settings according to
that. If it fails to receive Tieline session data within 5 seconds (i.e. a non-Tieline codec is
calling, or a Tieline codec with session data disabled), it will use the settings in the
ISDN
Answering Config instead.
Enable Sessionless Only when answering ISDN calls from non-Tieline codecs only.
When Sessionless is configured, the codec will not wait for the session data. This
reduces the time taken to answer an inbound sessionless call.
8. Select the default algorithm when receiving a call from a non-Tieline codec, then press the
button.
9. Specify the audio stream Route when receiving a call on the answering codec from a non-Tieline
codec, then press the button.
10. Select Yes and then press the button to confirm all changes.
Reset ISDN Answer Configs
To reset ISDN answering settings to factory defaults:
1. Navigate to Settings > Answering > ISDN Answer Configs > Reset ISDN Answer
Configs and then press the button.