Tieline Genie Distribution, Руководство пользователя, Страница: 213 / 426

213
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
The explanations within the following table can be used to assist with failover connection
configuration.
Screen Display Description
1 Threshold The percentage of lost data measured during a given time
frame
2 Time Frame The time frame against which lost data is measured
3 Keep Alive The keep connection alive time before failing over to a
backup connection; Tieline RTP pings every second to
confirm connectivity
4 Enable Automatic Failback Select the check-box to fail back to a higher priority
connection when failback parameters are met
5 Stable Time The amount of time a primary connection must remain
stable before attempting to fail back from the backup
connection
6 Maximum Retries The maximum number of fail back retries a codec can try
before ending fail back attempts
7 Time Frame The time frame used to measure the number of fail back
retries attempted
2. Enter a name for the backup connection and click Next .
3. Click Next to continue through the wizard and configure the backup connection in a similar
manner to how you configured the primary connection.
After configuring these settings there are 2 options:
i. Click Next to configure Output Audio Source options.
ii. Click Next Stream to configure the second audio stream.
Configuring Output Audio Source Options
1. Click Next to configure Output Audio Source options and automatically switch between up
to 4 backup audio sources to maintain program
audio at transmitter sites. Output Audio Source options include:
· Connection : Decoded connection audio sent from a remote codec (Note: this must be
selected as one of the configured sources).
· Input : Input audio looped to the physical codec outputs.
· HTTP : Icecast client mode to allow media server streaming from a specified URL.
· USB File Playback : Audio file playback from a USB stick.