Tieline Genie Distribution, Руководство пользователя, Страница: 20 / 426

20 Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
2. In the Add Device dialog enter the codec Name , and then click the drop-down Device Type
arrow and select Tieline Genie . Enter the IP Address and click Ok .
3. The Genie Distribution codec will now appear in the device list within the Razor Setup Tool.
4. Default WheatNet-IP source and destination names are
Src 1-6 and Dst 1-6 . If multiple codecs
are being configured it is a good idea to change the names to avoid multiple WheatNet-IP
channels sharing the same name and causing confusion.
Add the Codec to the Navigator Software Device List
1. Ensure the WheatNet-IP Navigator software (supplied by Wheatstone) is installed on your PC.
2. Launch the WheatNet-IP Navigator software, select the
System 3rd Party Devices tab and click
Add .
3. Enter the codec's Name and IP Address into the Add 3rd Party Device dialog. Click the Host
Blade drop-down menu to select the Blade to which the codec is assigned. The Genie codec
will use this Blade as a portal for communication with the WheatNet-IP system. Next, click Ok .
Important Note: A maximum of up to 10 Tieline codecs can be assigned to a single
Blade.