Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 245 / 330

C-Link Protocol Commands
Commands
Thermo Fisher Scientific Model 5028
i
Instruction Manual B-5
Command Description Page
alarm status det
a/b
Reports the detector status B-18
alarm tape
counter max
Reports/sets tape counter alarm maximum value B-18
alarm vac pres
max a/b
Reports/sets vacuum pressure alarm maximum value B-18
alarm vac pres
min a/b
Reports/sets vacuum pressure alarm minimum value B-18
allow mode cmd Reports/sets the current “set” allow mode command B-50
alpha eff a/b Reports/sets the current value of alpha efficiency for the
detector
B-30
alpha th a/b Reports/sets the current value of alpha threshold for the
detector
B-30
amb rh Reports the ambient relative humidity B-19
amb rh offset Reports/sets the current ambient relative humidity offset B-30
amb temp Reports the current ambient temperature B-19
amb temp offset Reports/sets the current ambient temperature offset B-31
analog iout
range
Reports/sets analog current output range per channel B-55
analog vin Retrieves analog voltage input data per channel B-55
analog vout
range
Reports/sets analog voltage output range per channel B-56
avg24 time a/b Reports/sets 24-hour averaging time to start averaging the
concentration
B-10
baro mass coef
a/b
Reports/sets the current barometric mass coefficient B-31
baro pres Reports the current barometric pressure B-19
baro span Reports/sets the current barometric pressure span B-32
baud Reports/sets current baud rate B-51
beta th a/b Reports/sets the current reference beta threshold for the
detector
B-32
bkg pm a/b Reports/sets current PM background B-32
board temp Reports the current board temperature B-19
cal baro pres
span
Automatically calculates the span coefficient B-33
cal flow pres
span a/b
Automatically sets the flow pressure span B-33
cal flow span a/
b
Automatically sets the flow span B-33
cal vac flow
offset a/b
Automatically sets the vacuum/flow offset B-34