Thermo Scientific 5028i, Инструкция по эксплуатации, Страница: 100 / 330

Operation
Instrument Controls Menu
3-46 Model 5028
i
Instruction Manual Thermo Fisher Scientific
The Choose Signal to Output screen displays a list of the analog
output signal choices. Choices are grouped into three categories:
Concentrations, Other Measurements, and Analog Inputs (if the I/
O expansion board option is installed). This allows the user to select
the output signal that will be assigned to each analog channel. The
Concentrations screen is shown below. See Table 3–5 for a list of items
for each signal group choice.
l
In the Main Menu, choose Instrument Controls > I/O
Configuration > Analog Output Config > select Channel > Choose
Signal to Output
.
CHOOSE SIGNAL TYPE:
>CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
RANGE AVG DIAGS ALARM
CHOOSE SIGNAL - CONC
SELECTED OUTPUT: V1
CURRENTLY: PM
SET TO: NONE ?
CHANGE VALUE SAVE
RANGE AVG DIAGS ALARM
Note
The Analog input config screen is visible only when the I/O
expansion board option is installed and the service mode is on . For
more information on the service mode, see “ Service Mode ” earlier in
“Program Versions Voltages”.
s
Table 3–5. Signal Type Group Choices
Concentrations Other Measurements Analog Inputs
None None None
PM Barometer Pressure Analog Input 1 (if the I/O expansion board
is installed)
AVG PM Vacuum Analog Input 2 (if the I/O expansion board
is installed)
Flow Pressure Analog Input 3 (if the I/O expansion board
is installed)
Ambient RH Analog Input 4 (if the I/O expansion board
is installed)
Sample RH Analog Input 5 (if the I/O expansion board
is installed)
Ambient Temp Analog Input 6 (if the I/O expansion board
is installed)
Board Temp Analog Input 7 (if the I/O expansion board
is installed)
Choose Signal to Output