Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 269 / 330

C-Link Protocol Commands
Datalogging
Thermo Fisher Scientific Model 5028
i
Instruction Manual B-29
which can then be transferred into the lrec, srec, or streaming data lists,
using the “set copy sp to lrec”, “set copy sp to srec”, or “set copy sp to
stream” commands.
Send: set sp field 1 34
Receive: set sp field 1 34 ok
stream per
This command reports the current time interval in seconds for
streaming data. The following example reports the streaming period is
set to 10 seconds.
Send: stream per
Receive: stream per 10 sec
set stream per
number value
number value = | 1 | 2 | 5 | 10 | 20 | 30 | 60 | 90 |120 | 180 | 240 | 300 |
This command sets the time interval between two consecutive streaming
data strings to number value in seconds. The following example sets the
number value to 10 seconds.
Send: set stream per 10
Receive: set stream per 10 ok
stream time
This command reports if the streaming data string will have a time
stamp attached to it or not, according to Table B–4 . The following
example reports that the streaming data shall not include a time stamp.
Send: stream time
Receive: stream time 0
set stream time value
This command enables value , where value is to attach or disable time
stamp to streaming data string, according to Table B–4 . The following
example attaches a time stamp to streaming data.
Send: set stream time 1
Receive: set stream time 1 ok
Table B–4. Stream Time Values
Value
Stream Time
0 Disables time stamp to streaming data string
1 Attaches time stamp to streaming data string