Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 294 / 330

C-Link Protocol Commands
Communications Configuration
B-54 Model 5028
i
Instruction Manual Thermo Fisher Scientific
Table B–9.
Set Layout Ack Values
Value
Function
0 Do nothing (default)
1 Append “*”
power up mode
This command reports the current power up mode setting to either 0
= local/unlocked or 1 = remote/locked, according to Table B–10 .The
default value is 0; power up in local/unlocked mode. The following
example shows that the instrument is configured to power up in the
remote/locked mode.
Send: power up mode
Receive: power up mode 1
set power up mode
value
This command is used to configure the instrument to power up in the
local/unlocked mode ( value = 0) or the remote/locked mode ( value = 1),
according to Table B–10 .
If the instrument is set to power up in the local/remote mode, the
keypad can be used to make changes via the front panel. If the
instrument is set to power up in the remote/locked mode, changes
can not be made from the front panel. The following example sets the
instrument to power up in remote/locked mode.
Send: set power up mode 1
Receive: set power up mode 1 ok
Table B–10.
Power Up Mode Values
Value
Power up Mode
0 Local/Unlocked Mode (default)
1 Remote/Locked Mode
program no
This command reports the analyzer’s model information and program
version number.
Send: program no
Receive: program no iSeries 5028i 00.05.37.093
tz
This command reports the “tz” timezone string for the NTP server. See
“Network Time Protocol Server” in the “Communications Settings”