Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 273 / 330

C-Link Protocol Commands
Calibration
Thermo Fisher Scientific Model 5028
i
Instruction Manual B-33
in current selected units. The following example sets the PM
background to 5.2 µg/m
3
.
Send: set bkg pm a 5.2
Receive: set bkg pm a 5.2 ok
Send: set bkg pm b 5.2
Receive: set bkg pm b 5.2 ok
set cal baro pres span
This command automatically calculates the span coefficient based on the
entered target pressure value. The following example sets the calibration
pressure to 720.5 mmHg.
Send: set cal baro pres span 720.5
Receive: set cal baro pres span 720.5 ok
set cal flow pres span a/b
This command automatically sets the flow pressure span based on the
flow pressure entered at the time of calibration. The following example
successfully sets the new value for flow span based on the flow pressure
to 50.5 mmHg.
Send: set cal flow pres span a 50.5
Receive: set cal flow pres span a 50.5 ok
Send: set cal flow pres span b 50.5
Receive: set cal flow pres span b 50.5 ok
set cal flow span a/b
This command automatically sets the new value for flow span based on
the corrected flow entered. The following example sets the new value for
flow span based on the corrected flow to 17.2 LPM.
Send: set cal flow span a 17.2
Receive: set cal flow span a 17.2 ok
Send: set cal flow span b 17.2
Receive: set cal flow span b 17.2 ok
set cal vac pres span a/b
This command automatically sets the vacuum span based on the
vacuum pressure entered at the time of calibration. The following
example successfully sets the new value for vacuum span based on the
vacuum pressure to 120.5 mmHg.
Send: set cal vac pres span a 120.5
Receive: set cal vac pres span a 120.5 ok
Send: set cal vac pres span b 120.5
Receive: set cal vac pres span b 120.5 ok