Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 281 / 330

C-Link Protocol Commands
Measurement Configuration
Thermo Fisher Scientific Model 5028
i
Instruction Manual B-41
set filter period
value
This command sets the number of hours to be added to filter next
time for the filter tape change to value, where value is a floating-point
representation of the filter period in hours. The following example sets
the filter period to 10 hours.
Send: set filter period 10
Receive: set filter period 10 ok
set filter tape a/b move
This command sets filter tape movement. The following example set
filter tape movement.
Send: set filter tape a move
Receive: set filter tape a move ok
Send: set filter tape b move
Receive: set filter tape b move ok
filter time
This command reports the next date and time of the filter tape change.
The following example reports that the date and time is January 1,
2008, 6:12 pm.
Send: filter time
Receive: filter time 01Jan08 18:12
set filter time dd-mm-yyyy hh:mm:ss
dd = day
mm = month
yyyy = year
hh = hours
mm = minutes
ss = seconds
This command sets the next filter tape change. The following example
sets the filter time to October 1, 2008, 11:32 pm.
Send: set filter time 10-01-2008 23:32
Receive: set filter time 10-01-2008 23:32 ok
flow target a/b
This command reports the current flow. The following example reports
that the flow is 16.0 LPM.
Send: flow target a
Receive: flow target a 16.00
Send: flow target b
Receive: flow target b 16.00