Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 161 / 330

Preventive Maintenance
Filter Tape Replacement
Thermo Fisher Scientific Model 5028
i
Instruction Manual 5-7
3. Loosen both reel nuts on tape spindles. Remove used filter tape and
empty tape spool from tape spindles.
4. Attach end of tape to blank tape spool on left tape spindle with
2-inch of tape for Channel A(Upper), and attach end of tape to
blank tape spool on right tape spindle with 2-inch of tape for
Channel B(Under)
5. Insert new blank pick up spool on right tape spindle for Channel
A(Upper), and insert new blank pick up spool on left tape spindle
for Channel B(Under).
6. Route tape according to Figure 5–5 .
7. Attach end of tape to blank tape spool on right tape spindle with
2-inch of tape for Channel A(Upper), and attach end of tape to
blank tape spool on left tape spindle with 2-inch of tape for Channel
B(Under).
8. Turn blank tape spool until there is two complete wrappings of tape.
9. Tighten right reel nut for Channel A(Upper), and tighten left reel
nut for Channel B(Under). From Filter Tape Control > Manual >
choose
Tape and press to MOVE tape.
10. From the main menu choose Alarms >
Instrument Alarms
to verify
that there are no filter tape alarms.
11. Confirm the filter tape can move correctly, then close front door.